Simple Progressive Watercolors

I have been interested in watercolors for a while now.  I have seen several artists online that do work all in one color of paint.  So I decided to try and create my own version, a very simplified version of course.

Here are all the supplies that you will need if you want to try these yourself:

• A piece of watercolor paper or another type of canvas meant for watercolors.
• One large brush for your first few washes.
• One small brush for the more detailed washes.
• One color of watercolor paint, or a mixture of different colors if you want to make your own.
• And finally, water of course!

First start out with a light wash with your large brush.  Let that dry completely before you begin your next wash.

Now, choose a shape or pattern you want to use for the rest of your painting.  Keep it small at first so you can get in a lot of washes, that way you can get your color nice and dark toward the end.  Just create an outline of your shape and paint from the outline to the edge of your paper.  Be sure to let only your first wash show through inside your shape.

Continue like this until your shape gets all the way to the edge. Just be sure to let each wash dry completely before you start the next one, this project can take some patience. If you are really in a hurry you can try a cool hair dryer, but I don't really recommend it.

Here are a few of the other pieces I have used this technique on.  What do you think? Is this a project you might want to try?  Leave me a comment and let me know how it goes!

DIY Painted Table Runner

I am a frequent and proud visitor of the Walmart clearance aisle. Most of the time there is not much there, but a few weeks ago I found this bamboo table runner which I really liked for only $5.

However, when I got it home it ended up looking kind of dull... so I had the idea to paint a design on it!

I printed off four different flower designs in two different sizes.  Then I cut them out to use as stencils.

When I was positioning them on the runner I was careful to not let the same flowers get too close together.  I also found that it looked best if I let some of the go over the edge.

Then I just painted the flowers in variety of coordinating colors, again being careful to not let the same colors end up next to each other.  I really love how it turned out! What do you think?

Washer necklaces

First of all, I would like to apologize for my long absence in the blogging world recently!  I have been preoccupied with school, but no more of that because I have GRADUATED!! So I fully intend to get back into the swing of things around here!

Awhile back I found this project on Pinterest, it is really easy and very affordable.  It's only washers, scrapbook paper and a special type of glue that dries with dimension. I was so excited that it really turned out as good as it looked online!  I ended up making them for all my friends for Christmas.

You can find the full tutorial that I used here.

Glass Marble Cross

On Wednesday, my best friend and I took a trip to Hobby Lobby in honor of the end of Summer and the new school year.  We were looking around in the aisle with all the wooden frames and such that you can paint. Well I found this wooden cross and had the idea to put some of those flat clear marbles around the center.

I stained the cross portion and then decided it would be better to paint the base.  Next I attached the
marbles with tacky glue.  I had to let them dry for a while with the cross laying down because when I stood it up the marbles started to slid off.  But once it was dry the marbles stayed on just fine.

I used this cool stain marker on this project.  I found it a while ago at Michael's I believe.  Anyway, it has lasted a long time and worked on so many projects, I love it!!  I need to find more of them in other colors, they are soooo much easier than regular stain!

Finally I decided it still looked to plain so I added some paint details.  And Ta-Da!  What do you think?

P.S.  I apologize in advance if my posting is kind of hit and miss for a while... the semester is starting to get into full swing and I will unfortunately be busy with homework a lot in the near future.  It is my last semester so things will be busy, however I will still do my best to keep up with you all in the blogging world!

Coat Rack Re-vamp

A long while ago, my mom gave me this old accordion style coat rack.  It is quite rickety, so I used to use it to keep my necklaces on.  I just recently took it from my room at home in my parents house to my dorm room. But it didn't quite fit in here, because this is what it used to look like:

Cute, but kind of boring, right?  Well it is amazing what a coat of paint can do!! I had some leftover turquoise paint from a bookshelf I painted awhile back, and it was perfect for this project!

Here is the finished product, minus the scarfs from above:

Much better!  I love giving old items a new life, and it was super easy!

No-Sew Ribbon Headband

A few months ago I saw some where that you can make your own stretchy headbands with a hair tie, so I thought I would experiment with it and this is what I came up with!

What you will need:

• Wide ribbon (I used a silky, flexible one, but I'm sure pretty much any ribbon with work)
• Elastic hair tie
• Scissors
• Hot glue gun
• Small decorative ribbon (optional)

First cut a piece of your ribbon that will go across your head from just below the back of your ears.  I think mine was about 8 inches long.

Then, cut your hair tie (at the seam if it has one) so that it is a straight piece of elastic. Next, attach one end of your hair tie to one end of your ribbon with a bead of hot glue.

Glue and fold over one side of the ribbon, then the same with the other.  This will help the ribbon to fold neatly, and not curl, when you wear it.

Then repeat these steps on the other side of your ribbon and hair tie. If you don't have any decorative ribbon to wrap around the seams then you are finished!

If you do have small riboon, measure how much you will need by wrapping it around the seam between the ribbon and the hair tie and cut it to size leaving a little extra on the end.  Then put a bead of hot glue down the underside of the ribbon and attach it, folding the raw ends under before you glue them down.

Viola! I really love it, and the elastic hair tie helps it not to slip! I think this has to be my favorite blog project yet, what do you think?

Vase Paint

Have you seen those tutorials that are floating around about painting glass vases and other containers by pouring acrylic paint in the bottom and swirling it around inside?? Well I really wanted to try it for myself, and boy am I glad I did!

This is my lovely creation!  However, I suck and forgot to take a before picture....

I chose to use a pearly white paint on this one because it already had a frosted finish with a pattern in it, so I wanted to highlight that.  And it definitely worked!  I know its only August, but I think this will make a cute Christmas decoration... picture it: red ribbon, and some holly coming out of it, pretty perfect right??

Well the painting processes was a lot harder than I thought it would be...  I had to use A LOT of paint, like half of my regular sized bottle, and this vase if fairly small.  But I think a big part of that was because this was a strange shape for a vase and I was wanting to cover all of the inside and not just a portion of it.  However, aside from the massive amount of paint it took to be able to maneuver the paint around inside by just rotating it, it wasn't that hard to get the painting done.

The long process came while it was drying.  That excess paint all started to pool in the bottom once I got the whole thing coated, and I had to keep draining it all out back into the bottle.  I ended up having to do this every few hours for a whole day to get rid of enough paint for the bottom to completely dry.  But on the bright side now I have a much more full bottle of paint again to use on future projects!

There are many more variations on this project out there, have you tried any? Please share, I will always appreciate comments, or suggestions for future projects!

Zig-Zag Finish

Have you ever been really tight on fabric and not sure you have enough to do a proper hem to finish out your project?  I've definitely been there time and time again... you'd think I'd learn to get extra fabric by now!!

Well just this week I was making a couple curtain panels for my sister's first dorm room.  We were not 100% sure of the exact dimensions of the window so I didn't want to waste a single centimeter!  So, I came up with a solution, I finished the bottom of each panel with a thick decorative stich, instead of a normal hem.

I positioned the needle as close to the bottom edge as I could without risking it slipping or sewing over the edge.

We picked out a thick zig-zag stich, shown above in the diagram on my machine.

When I was finished, the stich was less than a half inch from the edge of the fabric, even at it's tallest points.  I saved a whole inch easily, and I was very pleased!

I did accidentally go over the edge of the fabric at one point, but I was able to undo the messed up section with a seam ripper and continue the stich from the top of a point seamlessly.  So I recommend going slow on this type of finish, definitely worth the extra time!

Then to finish it off I simply cut off the fabric below the stich as close as I could without cutting into the  thread.  This step can be kind of time consuming, but I think the result was well worth the effort.

Give it a try and let me know what you think!

Flat Iron Hemming

Do you hate having to press a tiny hem with a full size iron? Do you not want to have to invest in a small appliqué iron?  Do you have a flat iron for your hair? Then problem solved!

This is a travel size flat iron (though a full size flat iron would also work) that I now keep with my sewing supplies.  I first tried this out of laziness, but it has turned out to be the best way to press hems that I have ever found!

First I just measure and pin the hems.  I also do both folds at once.  This hem is a half inch, so I folded the fabric in a half inch and then over once more to cover up the raw edge.

Then I simply ran the hot flat iron over the hem.  The great thing about this is that it heats the fabric from both sides at once, so, no matter how thick the fabric, there is never a need to iron twice.  And, there is no need to lug out the ironing board!

Then you can take out the pins and sew up the hem in a breeze, with no need to stop to take out pins along the way!  It's great!